Valve
Ductile Cast Iron Hand wheel Resilient Seated Water Seal Gate Valve
This valve widely applied in the liquid pipes for opening or closing fixing in such water, sewage disposal, electric power, energetics pipe , chemical, shipping, energy sources etc.
Standard | DIN 3352-F4 ,DIN 3352-F5, BS5163, AWWA C509 ,AWWA C515 Flange drilling is according to DIN2501, BS4504 and ANSI B16.1 PN10,PN16,PN25 |
Type | Flanged End , Socked End ,Mechanical Joint, non rising stem / rising stem |
Material | Body: Ductile iron GGG40/50 or Cast IronGG25 Wedge : Ductile iron GGG40/50+EPDM/NBR or metal seated Stem: stainless steel 2Cr13 , SS304,SS316 Bolt and Nuts : Carbon Steel with zinc plated or SS304,316 |
Coating | Internal and external with fusion bonded epoxy coating min250μm |
Ductile Iron Electric Double Flanged Eccentric Butterfly Valve
Size: DN100-DN1800 (4-72”)
Standard:
1. Design standard: BS5155, MSS SP 68.
2. Test standard: DIN3230 Part3, API598, EN12266-1.
3. Face to face standard: DIN3202 F4, EN558 13/14 series, ISO5752 13/14 series.
4. Flange connection: DIN 2501 PN10/16, BS4504 PN10/PM16, ASME B 16.1 125LB/150LB, JIS B2220 10K.
5. Medium: water, oil, gas and so on.
6. Working pressure: 10 bar/16 bar
7. Test pressure:
Shell: 15bar/24 bar
Seal: 11bar/17.6 bar
DIN Standard Cast Steel Stainless Steel Gate Valve
This valve is a fully flanged unit that is designed to be bolted into the pipeline using flange connections. Both stainless steel and cast steel material avaible for this type.
Design Std: DIN 3352, DIN EN 12516-2
Size:DN50--DN600
Body: Cast Steel WCB, GS-C25, Stainless Steel A351-CF8, CF8M, CF3, CF3M
Wedge: Stainless steel 304,316
Pressure Rating: PN25, PN40
Seat: Stainless Steel - AISI 420, 304,316
Bolted Bonnet; Outside Screw & Yoke
Face to Face:EN558-1 Series 15 (DIN 3202 F5)
Flanges drilled: Flange Drilling:DIN2501 PN25-40
Leakage rate B according to EN 12266-1
Temperature range: -10°C/+180°C
Cast Steel Carbon Steel Full Port Flanged End Ball Valve
We have many types of ball valves for you to choose from, and we can also customize them professionally according to your actual needs.
1. Size: DN15-DN300
2. Material: WCB, CF8, CF8M, CF3, CF3M
3. Two/Three-Piece body, floating ball
4. Face to face dimension: DIN 3202 F4/F5
5. Flanged end: DIN 2533
6. Pressure: PN16, PN25, PN40, PN64
7. Type of operation: lever, worm gear actuator, electric actuator, pneumatic actuator to ISO 5211 standard